skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@sk yworksinc.com ? www.skyworksinc.com 201241a ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? february 9, 2010 1 product summary SKY77601 multi-mode, multi-band power amplifier module for next generation gge and hspa handsets applications ? quad-band cellular handsets: - class 4 gsm850/egsm900 - class 1 dcs1800/pcs1900 - class e2 gsm850/egsm900 - class 12 multi-slot egprs ? multi-band 3g handsets ? wcdma/hsdpa/hsupa-modulated handsets for bands i, ii, v, and viii features ? hybrid architecture: separate gsm and wcdma paths ? separate single-ended gsm and wcdma inputs/outputs, all ac- coupled ? multiplexed voltage detector for all modes/bands provided to transceiver ? fully programmable serial bus interface ? final vcc stage for 2.5g/3g can be attached to battery or buck dc/dc ? driver stage for 3g can be attached to battery or buck dc/dc ? 2.5g features: - egprs class 12 multi-slot operation - log power detector - linear pa with bias optimization for efficiency/linearity trade- off in 8-psk mode ? 3g features: - wcdma mode supports output power and bandwidth for bands i, ii, v, and viii - linear detector - linear balanced with bias optimization and low/high mode gain switch for best efficiency/linearity trade-off ? small footprint, mcm (34-pin, 6 x 8 mm) pb-free (msl3, 260 c per jedec j-std-020) smt package description skyworks SKY77601 is a hybrid multi-mode, multi-band power amplifier module (pam). the device is intended to support 2.5g and 3g handsets and operates efficiently in gsm, egprs, edge wcdma modes. for 2.5g, the SKY77601 supports the gsm850, egsm900, dcs1800, and pcs1900 bands. the device also supports 2.5g class 12 enhanced general packet radio service (egprs) multi- slot operation and edge linear modulation. for 3g, the pam uses load insensitive power amplifier (lipa ? ) circuitry to support wcdma, high-speed downlink packet access (hsdpa), and high-speed uplink packet access (hsupa) modulation at a high antenna voltage standing-wave ratio (vswr). this functionality covers multiple bands for 3gpp including bands i, ii, v, and viii. rf input and output ports are internally matched to 50 ? to reduce the number of external components. extremely low leakage current maximizes handset standby time. the ingap die, the silicon die, and passive components are mounted on a multi-layer laminate substrate. the assembly is encapsulated with plastic overmold. the device is mounted in a 34-pin, 6 x 8 mm mcm surface- mounted technology (smt) package, which allows for a highly manufacturable low-cost solution. a block diagram of the SKY77601 is shown in figure 1. the device package and pinout for the 34-pin mcm are shown in figure 2.
product summary SKY77601 multi-mode / multi-band power amplifier module for next generation gge and hspa handset skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@sk yworksinc.com ? www.skyworksinc.com 2 february 9, 2010 ? skyworks proprietary and confidential information ? products and product information are subject to ch ange without notice ? 201241a figure 1. SKY77601 functional block diagram figure 2. SKY77601 pad configuration C 34-pin mcm (top view)
copyright ? 2010 skyworks solutions inc. all rights reserved. information in this document is provided in connection with skyw orks solutions inc. (skyworks) products or services. these ma terials including the information contained herein are provided by skyworks as a service to its customers and may be used for info rmational purposes only by the cu stomer. skyworks assumes no res ponsibility for errors or omissions in these materials or the information contained herein. skyworks may ch ange its documentation products services specifications or product descriptions at any time without notice. skyworks makes no commitment to update the materials or information and shall have no responsi bility whatsoever for conflicts incompatibilities or other diffic ulties arising from any future changes. no license whether express implied by esto ppel or otherwise is granted to any intelle ctual property rights by this document. sk yworks assumes no liability for any materials products or information provided hereunder including the sale distribution reproduction or use of skyworks products inform ation or materials except as may be provided in skyworks terms and conditions of sale. the materials products and information are pr ovided as is without warranty of any ki nd whether express implied statutory or o therwise including fitness for a particular purpose or use merchan tability performance quality or non-infringement of any intellectual property right; all such warranties are hereby expressly disclaimed. skyworks does not warrant the a ccuracy or completeness of the information text graphics or other items contained wi thin these materials. skyworks shall not be liable for any damages including but not limited to any special indirect incidental statutory or consequential dam ages including without limitation lost revenues or lost profits that may result from the use of the materials or information wheth er or not the recipient of mate rials has been advised of the possibility of such damage. skyworks products are no t intended for use in medical lifesaving or life-sust aining applications or other equipment in which th e failure of the skyworks products co uld lead to personal injury death physical or environmental damage. skyworks cu stomers using or selling skywor ks products for use in such applications do so at t heir own risk and agree to fully indemnify skyworks for any damages resulting from such improper use or sale. customers are responsible for their products and applications us ing skyworks products which may deviate from published specific ations as a result of design defect s errors or operation of products outside of published parameters or design sp ecifications. customers shou ld include design and operating safeguards to minimize these and other risks. skyworks assumes no liability for applications assistance customer product de sign or damage to any equipment resulting fr om the use of skywor ks products outside of stated published specifications or parameters. skyworks the skyworks symbol b reakthrough simplicity dcr helios hip3 innovation to go intera ipac lipa polar loop and system smart are trademarks or regist ered trademarks of skyworks solutions inc. in the united states and other countries. third-party br ands and names are for identification purposes only and are the property of their respecti ve owners. additional information including relevant terms and conditions posted at www. skyworksinc.com are incorporated by reference.
|
